Click image to view full size image
Parameter of AlTiC
1. Material: low-Ferrum aluminum ingots; K2TiF6 (potassium fluotitanate); C powder
2. Formation of AlTiC: TiAl3; TiC
3. Shape of TiAl3: block and rod shape, mainly rod shape
4. Size of TiC: <2μm
5. Nucleation particle: TiC
6. Structure of TiC: face-centered cubic
7. Lattice constant of TiC: 0.4329nm
8. Density of TiC: 4.93g/cm3
9. Crystal density of TiC: 74%
10. Nucleation efficiency of TiC: 50:1 on average
Specification |
Chemical components of Al-Ti-C (%) |
|||||||
Ti |
C |
Fe |
Si |
V |
Other each |
Other total |
Balance |
|
AlTi3C0.15 |
2.6-3.4 |
0.08-0.22 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
AlTi5C0.18 |
4.5-5.5 |
0.13-0.23 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
AlTi5C0.2 |
4.5-5.5 |
0.15-0.25 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
AlTi5C0.2Pt |
4.5-5.5 |
0.15-0.25 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
AlTi5C0.2La |
4.5-5.5 |
0.15-0.25 |
≦0.20 |
≦0.20 |
≦0.05 |
≦0.03 |
≦0.10 |
Aluminum |
Product Description
Through unremitting researching by the researcher of our company, cooperated with light alloys research institute of CSU (central south university), base on patent 4873054# USA, our company has succeeded finally in producing super Al-Ti-C aluminum grain refiner, which is much better than optimum first grade Al-Ti-B grain refiner. Its refining effect is comparable with the same product of Europe and American made, or even much better. Our alloys components are mainly defined into two kinds: Al-5Ti-(0.1～0.5)C, Al-3Ti-(0.1～0.3) C. Through experiments over and over again, our product Al-Ti-C grain refiner owns some out- standing advantages, such as stable property, excellent effective duration (anti-fading capacity), it can make the aluminum products gain more fine isometric crystal, it can effectively overcome the common defects of aluminum products such as crackle and cold separation, and significantly improve the strength and tenacity of aluminum products.
FAQ
Q: What's the application?
A: EC grade aluminum wire rod, aluminum cans alloy for body/lids, automotive trim parts,7XXX alloys which contains Zr,Cr etc.
Q: What' s the production capacity of your company?
A: 350MT per month for AlTiC.
Q: Do you have any certificate?
A: Yes, we have ISO9001: 2015, SGS, RoHS, MSDS and CNAS.
Product Pictures
http://www.fy-altic.com/